Ways to Read through Check Engine Codes

Check engine codes, or diagnostic difficulties, deliver information on malfunctions from the vehicle's drive-train management strategy. The on-board personal computer runs frequent exams for the a number of sensors while in the method, and if any of people sensors send back facts that doesn't correlate together with the factory specs for that distinct sensor, the personal pc generates a code. As soon as the laptop or computer outlets a code, it turns over the test engine light to alert the driver of a malfunction. Others Are Studying How to get Examine Engine Light Codes The best way to Read OBD2 Codes Stuff You'll need Scan tool Pen Paper Display Even more Guidelines 1

Remove the dust cover through the diagnostic port underneath the driver's side of your dashboard. The cover is regularly black, with letters or possibly a word indicating what it is actually, embossed for the face. Seem for "DTC" or "Diagnostic" or some variation, depending to the year, make and model of your vehicle.

2

Plug the datalink cable from your scan instrument into the diagnostic port. Refer to the scan tool's specific guidelines on running a self test around the process. While this will vary depending for the brand and model on the scan device, the scan tool's display screen usually prompts you on tips on how to proceed.

3

Write down the codes for reference during the diagnostic procedures. When prompted to clear/erase the codes, select "no" and complete the self test.

4

Disconnect the datalink cable through the diagnostic port and put the cover back over the port.