The way to Reset the Services Engine Light within a Chevrolet S10

The services engine light will turn on at typical intervals when your motor vehicle requires program maintenance. Immediately after the servicing is completed you are likely to need to manually reset the light to turn it off. This is a straightforward adjustment that will only get some moments. Others Are Studying The right way to Reset the "Support Engine Soon" within a Chevy How you can Reset a Chevy S10 Computer Things You'll Will need OBD II scanner tool Ignition key Show More Instructions 1

Look for the OBD II port located near the emergency brake on the lower dashboard. The OBD II port will be the receptive end for the connector on the OBD II scanner tool. Examine the connector end of the tool and the receptive port to make sure you have the correct port. Plug the OBD II scanner tool into the port.

2

Close the doors, roll up the windows and turn on the OBD II scanner tool. Put the key into the ignition and flip it to "on," but take care not to start the engine. Turning the car on will start the electrical system which will power the OBD II scanner tool and allow it to do its job. The engine requires to remain off for the scanner to work.

3

Wait for the screen on the scanner to stop flashing. The service engine light will have turned off. Turn the key in the ignition to "off" and unplug the scanner.

4

Restart the engine and verify that the services engine light is still off on the instrument panel. Flip off the car.